Henry Vacuum Cleaner Parts Explained [with Pictures] - The Henry Vacuum Cleaner Series | Offers, reviews and comparisons (2023)

Amazon and the Amazon logo are trademarks of Amazon.com, Inc or its affiliates

Henry combination floor nozzle

You are probably familiar with this page if you have used a Henry vacuum before. It is the main floor tool used with this vacuum and it connects to the stainless steel tube that leads to the base unit. The main feature of this tool is a pedal that, when pressed with your foot, raises and lowers the toothed brush on the bottom. It is recommended to leave the brush in the down position as it will break up the dirt on the carpet and be ready to be sucked up by Henry's powerful motor. However, if you're vacuuming over surfaces like hard wood floors, you have the option of elevating the brush, as it's not needed in that situation.

Henry Airo-Pinsel

This upgrade to the standard combination floorhead improves the overall performance of the machine. It contains a turbine in the head that drives a brush roller that spins at high speed and creates greater suction than the regular tool. Just like the standard version, it easily attaches to the stainless steel tube and is recommended for anyone looking to improve their Henry vacuum cleaner.

replacement filter

The purpose of this filter is to capture the smallest dust particles and prevent them from getting into the fans, protecting the engine from damage. This is an essential part of the kit to ensure your machine lasts and performs efficiently. It's also worth noting that damage that would likely result from not using a filter would void the warranty on your machine, so it is strongly recommended that you order a replacement if you think your filter is worn or damaged.

feather duster

This tool is similar to a traditional duster you would use at home to remove dust and dirt from fragile surfaces. The soft bristles gently kick up dust from surfaces like keyboards and the Henry vacuum's suction power does the rest. This is a great tool to ensure you don't damage any of the delicate items around your home.

upholstery brush

With this attachment, you can easily vacuum those hard-to-clean areas like stairs and common nooks and crannies that are present in every home. It is attached to the hose part of the machine and replaces the conventional combination floor nozzle. This attachment is perhaps the most useful for cleaning your car.

splitting tool

The crevice tool is extremely useful for reaching the smallest gaps and areas on your floors and between your furniture that need cleaning. It easily attaches to the end of the stainless steel tube, and because the powerful suction is concentrated in such a small area, the results you can achieve with this relatively simple tool are very impressive. Simply attach and slide along your skirting board to quickly and easily remove that fine film of dirt that is often unreachable.

Hepaflow bag

These are the recommended bags for use with the Henry and are manufactured by Numatic. The purpose of these bags is to capture and store all that dust and dirt that you inevitably pick up from your floors. They are not intended for reuse and should be discarded in the trash once full. You can buy them in packs of 10.

garment bag

The cloth bag is an upgrade to the regular Hepaflow bag. They are suitable for business users or those who are likely to use their Henry much more often and longer than the average user. They are designed to hold large amounts of dust and dirt and have a convenient zipper that allows you to open the contents, empty them into the bin and then reuse them. They are also fully machine washable.

Edelstahlrohre

The Henry comes with three stainless steel tubes that act as a highway for all the dirt and dust to reach the bag. There is a curved tube that attaches to the vacuum head, as well as the other two straight tubes. The ability to use either one or two straight tubes means you can adjust the working height of this machine depending on your size.

Flexible hose

The Henry comes with a standard 2.4m black plastic corrugated hose that connects the machine to the stainless steel pipes, or a range of attachments that you can use instead. The hose is strong and durable, so don't worry about it tearing or tearing. It's possible to buy hoses up to 10m long, but it's worth noting that doing so is likely to result in an overall loss of suction.

As an Amazon Associate, I earn from qualifying purchases.